Process of Building a Facility for Water Treatment

Drinking water filtration has been used for many years. Boiling, filtering, sedimentation, and solar treatment are a few techniques that have been applied. These age-old methods, however, are no longer effective. To provide the purest drinking water possible, extensive research has been done by Dewpure Engineering Pvt Ltd to develop efficient water treatment techniques. The basic procedures for building a water treatment plant in Kolkata are listed below.

Coagulation

Chemicals called coagulants are added to water to balance the dissolved particles’ negative charges. For instance, alum and iron are two coagulants. Unfortunately, after the coagulants are introduced, the water mixes quickly. The resulting weight gain causes the particles to settle out of the water.

Flocculation

To help with the coagulation process, the water is made to flow into a flocculation basin. Here, the flocs’ size is increased to aid in settling out. To help in this process, a flocculant may also be added to the water. Slow paddle mixers inside the flocculation basin aid particle collision.

Sedimentation

Sedimentation is the process of removing sediments or solids from water. Due to gravity, the flocs fall to the basin’s floor after becoming heavier.

Filtration

Now, the crystal-clear water flows through pores of varying diameters to filter out any remaining solids. This stage separates sand, gravel, dust, and even microorganisms. Backwashing frequently occurs on the filter. The water is also treated using reverse osmultra-filtrationiltration.

Activated carbons are another option. This adcanbility to alter the color, taste, and odor of recycled water.

Disinfection

To keep the water treatment plant in Kolkata operating, one or more disinfectants might be added to the water. To eliminate any remaining bacteria or viruses in the water, for instance, chlorine or chlorine dioxide may be employed. Additionally, some plants use UV light to purify the water.

Benefits of treating water

• We can drink clean, safe water thanks to water treatment.
• Restore the purity and nutrition of water that has lost some of its natural qualities.
• Utilizing recycled water can help reduce pollution.
• Numerous diseases are spread by contaminated water. These can be avoided by using purified water.
• Instead of purchasing mineral water, it is more cost-effective to treat the local water.

Further methods of water treatment

There are numerous ways to improve water quality than the main procedure stated above.

Ultrafiltration: Water passes through pores that range in size from.01 to 0.1 micronultrafiltrationiltration. When fighting bacterial and viral infections in the water, it is quite effective.

Ozonation: By treating water with ozone, organic substances and microbes can be removed.

Bubble attachment is used to extract material from liquid through flotation.

Biological treatment: Contaminants are broken down by microorganisms. Autotrophs can produce lipids, proteins, or carbohydrates as well as fix carbon in the water. Heterotrophs can contribute by consuming organic waste particles.

Desalination: Desalination techniques like reverse osmosis and distillation are often used, especially in coastal areas of a packaged drinking water plant.

Ion exchange: A resin with potent sodium and chloride ions keeps the polluting ions bound to it.

Now, if you are planning to build a water treatment facility in India, you can connect with us for valuable suggestions and budget plans.